1-Year Warranty

$14.99
$14.99
Sold out

Record, download, and manage all the action with the HD Mirror Cam!

  • Easy Installation- clips on to existing rearview mirror
  • Motion Detection- responds to movement outside of car
  • Exclusive Night Vision
  • 2.5” LCD Playback Screen With Screen Shut Off Mode
  • Supports Class 10 Speed Micro SD Memory Cards up to 32 GB*
  • Built-in Rechargeable Battery
  • 350° Rotating Camera
  • Plus much more!

HD dash cam, ready to take action

Downloadable Audio/Video/Photo

Connect card reader into USB port of your computer to download content.

Auto Ignition Start

Easy to install & starts recording automatically with ignition start.

720P HD Video

Records in 720P, 120º HD wide angle video and crystal clear audio.

Frequently Asked Questions

Can’t find what you’re looking for? See our full FAQ list

  • HD Mirror Camera
  • Car charger/vehicle power cable
  • Reset pin
  • Five 3m wire clips
  • Quick start guide
  • Instruction manual
  • Micro SD card reader
  • 2 sets of (2) soft rubber band straps

Attach the HD Mirror Cam to your existing rear-view mirror using the adjustable rubber strap bands. Connect the device to the included car charger. Use the included clips to secure the charger cord around the windshield. Once the above steps are done, turn on the ignition of the car, and the HD Mirror Cam will automatically start recording (make sure the micro SD card is inserted).

Videos are recorded in a loop. After every loop, the screen goes blank for 30 seconds, and then it comes back. You can set the video time to 10 minutes if you want a longer loop.

Verify whether the memory card is inserted correctly in the adaptor. Also, verify that you are using the correct type of SD card and that it’s either an 8GB, 16GB or 32GB SD card.

The HD Mirror Cam is designed to fit most standard-size, factory-issued rear view mirrors (vehicles equipped with built-in smart mirrors like OnStar might not be able to use it properly). If you have an extra thick mirror, reach out to us first if you are unsure.

To view or listen to video, photo and audio on a computer, follow these steps:

  • Remove the micro SD card from the HD Mirror Cam by pressing lightly on the SD card. The SD card will eject partially, allowing you to remove it.
  • Insert the micro SD card into the SD card reader.
  • Insert the SD card reader into the USB port of your computer.
  • Once connected to the computer, a removable drive will pop up on your computer/laptop screen. Select that drive to view and listen to your recordings.